Europe · en-gr
Industrial Fasteners Manufacturer, Wholesaler, Supplier & Exporter to Greece
Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Greece with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
26
Fastener Product Categories
104
Trade Roles Covered
FCL & LCL
Container Shipping Options
Greece at a glance
- Region
- Europe
- Capital
- Athens
- Population
- 10 million
- Local currency
- Euro (EUR)
- Languages
- Greek
- Time zone
- Europe/Athens (UTC+03:00), 2 h 30 min behind India
- Indicative sea transit from India
- about 18–32 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
Trade & Shipping Notes
- • Fasteners are typically classified under HS Chapter 73 for import into Greece — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Why Buy From Us
Manufacturer, wholesaler, supplier, and exporter for Greece
How we deliver to Greece, role by role.
Manufacturer in Greece
We manufacture Hex Bolts, Hex Nuts and Flat, Spring & Lock Washers to DIN and ISO, with ASTM for structural and pressure-boundary work. Every batch is inspected for dimensions, material, and mechanical properties before it is packed, and mill test certificates can be supplied so your inspector in Greece can sign off.
Wholesaler in Greece
Buyers in Greece can order at volume pricing across mixed sizes and grades. You do not need a full container: partial-container (LCL) orders run under Hurain Engitech & Trade, so a distributor testing Greece demand can start small and scale to full container loads.
Supplier in Greece
That kind of demand rewards a dependable source, so we set up repeat supply against one agreed specification: same standard, grade, finish, and packing on every shipment to Greece.
Exporter in Greece
We handle the commercial invoice, packing list, certificate of origin, and HS-code classification, and quote FOB, CFR, or CIF to your nearest port. Your customs broker in Greece confirms the final landed cost.
Step 1
Confirm the specification
Send product, standard, grade, finish, and quantity for Greece. We confirm feasibility, MOQ, and lead time.
Step 2
Manufacture or pick from stock
Common sizes of Hex Bolts and Hex Nuts ship from ready stock; special grades and custom parts are produced against a first-article sample.
Step 3
Inspect and pack for sea freight
Batch inspection, corrosion-protected export packing, and labeling that matches your purchase order.
Step 4
Book the container and finish documents
Payment is 50% in advance and 50% before dispatch, once all export documents are complete.
Step 5
Ship to Greece
Indicative sea transit from India is about 18–32 days. We stay on the shipment through customs handover.
Industries
Industries we supply in Greece
Chosen from what drives fastener demand in Greece, not a generic list. Trade context for every industry below: indicative sea transit from India about 18–32 days.
Automotive in Greece
Why it matters here: Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Greece with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
What buyers need: High-tensile grade 8.8/10.9 bolts for chassis and suspension.
We supply to Greece: Hex Bolts, Flange Bolts & Flange Nuts, Nylon Insert Lock Nuts.
Where We Help
Fasteners we lead with in Greece
Hex Bolts in Greece
The hex head is popular precisely because it's a compromise that works everywhere: six flats give a wrench or socket enough surface area to apply high torque without rounding off, while the head stays compact enough to fit into most structural and mechanical layouts. That's why hex bolts, more than any other head style, end up specified as the default fastener across construction, machinery, and vehicle assembly.
Common use: Beam-to-column and gusset-plate connections where a specific property class is called out on the fabrication drawing.
Container quantity (approx.): A standard 20ft container (~20 tons) holds approximately 400,000-600,000 pieces of hex bolts in common sizes (M10-M12) — smaller diameters yield more pieces, larger structural sizes far fewer. Exact quantity depends on the specific size and grade ordered and is confirmed at quote time.
Hex Nuts in Greece
A nut is only as good as the bolt it's matched to, which is why buyers who source nuts and bolts from different suppliers occasionally run into assembly problems that have nothing to do with either part being defective on its own — a slightly different thread tolerance class or pitch standard between the two can produce a joint that turns by hand but never reaches proper clamping torque.
Common use: Paired with hex bolts and threaded rod across nearly every industrial and construction application.
Container quantity (approx.): A standard 20ft container (~20 tons) holds approximately 1.2-1.6 million pieces of hex nuts in common sizes (M10-M12). Exact quantity depends on size and grade and is confirmed at quote time.
Flat, Spring & Lock Washers in Greece
A flat washer's job looks trivial — spread load, protect the surface — but the wrong washer under a high-tensile bolt genuinely reduces the joint's effective clamping capacity, because an undersized or overly soft washer can crush or dish under torque before the bolt reaches its intended preload. Structural and high-tensile applications specify hardened flat washers for exactly this reason.
Common use: Distributing load and protecting the clamped surface from bolt-head or nut damage.
Container quantity (approx.): A standard 20ft container (~20 tons) holds approximately 3-5 million pieces of flat or spring washers in common sizes (M10-M12). Exact quantity depends on size and thickness and is confirmed at quote time.
The Challenge
What buyers run into in Greece
Full payment upfront to an unknown supplier
Greece buyers new to overseas fastener sourcing are often asked for 100% payment upfront with no staged verification point.
No clear point for document review
Without a defined stage for reviewing export documents before final payment, disputes over discrepancies become harder to resolve.
Unclear escalation path
When something goes wrong mid-order, not knowing who to contact or what recourse exists adds risk to the relationship.
How We Solve It
Our approach for Greece orders
Staged payment terms
Standard terms are 50% advance to confirm the order, with the balance due before dispatch once all export documentation is completed — not 100% upfront.
Documentation reviewed before balance is due
Export documents are finalized and available for review before the remaining balance is requested.
Direct contact throughout
You have a direct line to the team handling your order for the full cycle, from quote to shipment.
Trade Roles
How we serve Greece as manufacturer, wholesaler, supplier & exporter
Our Standard
What every Greece order includes
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
Process
How ordering for Greece works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Not sure which Incoterm to choose? Read our FOB vs CIF vs CFR guide.
FAQ
Greece — frequently asked questions
Request a quote for Greece
Send your product list, quantities, and destination port for a quote within 1-2 business days.