South Asia · en-in
Industrial Fasteners Manufacturer, Wholesaler, Supplier & Exporter to India
Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in India with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
26
Fastener Product Categories
104
Trade Roles Covered
FCL & LCL
Container Shipping Options
India at a glance
- Region
- South Asia
- Capital
- New Delhi
- Population
- 1326 million
- Local currency
- Indian rupee (INR)
- Languages
- Hindi, English
- Time zone
- Asia/Kolkata (UTC+05:30), same time as India
- Indicative sea transit from India
- about 5–15 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
Trade & Shipping Notes
- • Fasteners are typically classified under HS Chapter 73 for import into India — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Why Buy From Us
Manufacturer, wholesaler, supplier, and exporter for India
How we deliver to India, role by role.
Manufacturer in India
We manufacture Stainless Steel Fasteners, High-Tensile Structural Bolts and Anchor Bolts to BIS/IS, DIN, and ISO to the buyer's tender documents. Every batch is inspected for dimensions, material, and mechanical properties before it is packed, and mill test certificates can be supplied so your inspector in India can sign off.
Wholesaler in India
Buyers in India can order at volume pricing across mixed sizes and grades. You do not need a full container: partial-container (LCL) orders run under Hurain Engitech & Trade, so a distributor testing India demand can start small and scale to full container loads.
Supplier in India
That kind of demand rewards a dependable source, so we set up repeat supply against one agreed specification: same standard, grade, finish, and packing on every shipment to India.
Exporter in India
We handle the commercial invoice, packing list, certificate of origin, and HS-code classification, and quote FOB, CFR, or CIF to your nearest port. Your customs broker in India confirms the final landed cost.
Step 1
Confirm the specification
Send product, standard, grade, finish, and quantity for India. We confirm feasibility, MOQ, and lead time.
Step 2
Manufacture or pick from stock
Common sizes of Stainless Steel Fasteners and High-Tensile Structural Bolts ship from ready stock; special grades and custom parts are produced against a first-article sample.
Step 3
Inspect and pack for sea freight
Batch inspection, corrosion-protected export packing, and labeling that matches your purchase order.
Step 4
Book the container and finish documents
Payment is 50% in advance and 50% before dispatch, once all export documents are complete.
Step 5
Ship to India
Indicative sea transit from India is about 5–15 days. We stay on the shipment through customs handover.
Industries
Industries we supply in India
Chosen from what drives fastener demand in India, not a generic list. Trade context for every industry below: indicative sea transit from India about 5–15 days.
Automotive in India
Why it matters here: Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in India with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
What buyers need: High-tensile grade 8.8/10.9 bolts for chassis and suspension.
We supply to India: Hex Bolts, Flange Bolts & Flange Nuts, Nylon Insert Lock Nuts.
Where We Help
Fasteners we lead with in India
Stainless Steel Fasteners in India
The 304 vs. 316 decision comes down almost entirely to one alloying element: molybdenum, added in 316, which dramatically improves resistance to chloride-induced pitting and crevice corrosion. In practice this means 304 performs perfectly well in most indoor and general outdoor settings, while 316 earns its higher price specifically in marine, coastal, and chemical-exposure environments where chlorides are present.
Common use: Grade 316 fasteners resisting chloride exposure from saltwater and sea spray.
Container quantity (approx.): A standard 20ft container (~20 tons) holds approximately 500,000-800,000 pieces of stainless fasteners in common sizes (M10-M12) — stainless steel's density is close to carbon steel, so counts are similar. Exact quantity depends on the specific product and size and is confirmed at quote time.
High-Tensile Structural Bolts in India
High-strength friction-grip bolting works on a principle that surprises people outside structural engineering: the joint doesn't primarily rely on the bolt shank resisting shear at all. Instead, the bolt clamps the connected plates together so tightly that friction between the plates themselves transfers the load — which is why installation torque (or the direct-tension method used to verify it) matters as much as the bolt's material grade.
Common use: Beam-to-column and truss connections requiring certified friction-grip performance.
Container quantity (approx.): A standard 20ft container (~20 tons) holds approximately 60,000-100,000 sets of high-tensile structural bolt assemblies (bolt, nut, washers) in common sizes (M16-M20). Exact quantity depends on size and grade and is confirmed at quote time.
Anchor Bolts in India
Anchor bolts are cast into concrete before it cures, which means there's no second chance to fix a placement error the way there is with a post-installed anchor — the embedment depth, projection length, and bolt pattern all need to be correct on the structural drawing before the pour, not adjusted afterward. This is why anchor bolt orders are almost always tied to an approved structural drawing rather than a generic catalog size.
Common use: Anchoring structural steel columns to concrete foundations in industrial sheds and multi-story frames.
Container quantity (approx.): A standard 20ft container (~20 tons) holds approximately 30,000-60,000 pieces of anchor bolts in common sizes (M12-M16), fewer for longer, larger-diameter foundation bolts. Exact quantity depends on size and length and is confirmed at quote time.
The Challenge
What buyers run into in India
MOQ mismatched to real need
India buyers who don't yet need a full container are sometimes pushed into an FCL order they don't need, or refused service below an arbitrary minimum.
Opaque per-piece pricing
Container-load pricing without a clear per-piece or per-kilogram breakdown makes it hard to compare quotes or plan a smaller trial order.
Hidden costs surfacing late
Freight, insurance, and documentation charges added after the initial quote is a common source of budget surprises.
How We Solve It
Our approach for India orders
Partial-container orders welcome
Smaller LCL orders of a few pallets or boxes are available for buyers who don't yet need full-container volume.
Transparent container-quantity estimates
We publish approximate per-container piece counts by product so you can plan order size against your real requirement.
Incoterm clarity upfront
Quotes specify FOB, CIF, or CFR clearly, so you know exactly what's included before confirming an order.
Trade Roles
How we serve India as manufacturer, wholesaler, supplier & exporter
Our Standard
What every India order includes
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
Process
How ordering for India works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Not sure which Incoterm to choose? Read our FOB vs CIF vs CFR guide.
FAQ
India — frequently asked questions
Request a quote for India
Send your product list, quantities, and destination port for a quote within 1-2 business days.