Screws
Wood Screws & Drywall Screws Manufacturer, Wholesaler, Supplier & Exporter
Wood screws, chipboard screws, and drywall/gypsum screws are core fasteners for furniture, joinery, and interior construction. We manufacture and export these across coarse and fine thread patterns for softwood, MDF, and drywall applications.
Wood is a fundamentally inconsistent base material compared to metal, and screw design has evolved specifically to manage that: a traditional wood screw's tapered shank and coarse thread are built to avoid splitting the timber along the grain, while a chipboard screw's aggressive, sharp thread is built for engineered board, which has no grain direction to split along but crumbles differently under load.
Pre-drilling remains the most commonly skipped step in wood screw installation, especially near the end of a board or in hardwood, where the risk of splitting is highest. It's not a universal requirement — softwood away from edges usually doesn't need it — but treating it as always-optional is how visible splits end up in finished furniture and decking.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) typically holds several million pieces of wood screws in common sizes. Exact quantity depends on length and gauge and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Specifications
Standards
DIN 95, DIN 96 (traditional wood screws), DIN 7505 (chipboard/particle board screws).
Types
Countersunk and round head wood screws, drywall (bugle head) screws, decking screws.
Size range
3mm to 8mm diameter, 12mm to 200mm length.
Finish
Yellow zinc, black phosphate, or stainless steel.
Applications
Furniture & joinery
Cabinet and furniture assembly in softwood and engineered board.
Drywall & interior fit-out
Gypsum board fixing to metal or timber studs.
Decking & outdoor timber
Decking screws with corrosion-resistant coatings.
General construction
Formwork and general timber fastening.
Materials Available
Steel
Corrosion-resistant
Thread-forming performance and head-drive fit are checked against DIN standards for consistent installation.
How We Manufacture & Export This Product
- 1
Spec confirmation
Confirm head type, thread pattern, and coating for the target board material.
- 2
Cold heading & threading
High-speed forming with coarse or fine thread rolling.
- 3
Heat treatment & coating
Case hardening for drywall screws; zinc or phosphate coating for corrosion protection.
- 4
Packing & export
Bulk cartons or retail packs, palletized for container loading.
Export Track Record
Bulk-exported to furniture manufacturers and construction hardware wholesalers.
Real-World Use Cases
Furniture and cabinetry assembly
Softwood and engineered board joints in furniture manufacturing.
Drywall and interior fit-out
Bugle-head screws fixing gypsum board to metal or timber studs.
Decking and outdoor timber
Corrosion-resistant coated or stainless screws for weather-exposed timber structures.
Common Mistakes Buyers Make
Skipping pre-drilling near board edges
Edge and end-grain fixings are the most likely to split without a pilot hole, even in softwood.
Using drywall screws in structural timber joints
Drywall screws are hardened but brittle — they can snap under the shear loads a structural wood screw is designed to handle.
Choosing the wrong coating for treated lumber
Modern ACQ-treated lumber corrodes standard zinc-plated screws faster — use a coating rated for treated wood contact, or stainless.
Glossary of Terms
- Gimlet point
- A sharp, self-starting screw tip that reduces the need for pre-drilling in softer materials.
- Bugle head
- A drywall screw head shape that countersinks into paper-faced gypsum board without tearing it.
- ACQ-compatible coating
- A fastener coating rated for contact with alkaline copper quaternary treated lumber, which corrodes standard coatings faster.
Quality Inspection We Perform
Dimensional inspection
Thread gauge, length, diameter, and head/drive geometry checked against the specified standard.
Material verification
Grade and material composition confirmed against the order specification, with mill test certificates on request.
Mechanical testing
Tensile strength, hardness, and proof-load testing on sample batches, particularly for structural and high-tensile grades.
Finish & coating check
Plating thickness, galvanizing coverage, or passivation quality inspected before packing.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Countries We Export Wood Screws & Drywall Screws To
View all markets →Buying guide
How to Choose a Reliable Wood Screws & Drywall Screws Manufacturer, Wholesaler, Supplier & ExporterWhy wood screws and drywall screws aren't interchangeable despite looking similar, and what coating matters most for treated lumber and outdoor decking.
Frequently Asked Questions
Related Products
Ready to order Wood Screws & Drywall Screws?
Send your quantities, grade, standard, and destination port for a quote.