North America · en-vi
Eye Bolts Manufacturer, Wholesaler, Supplier & Exporter to U.S. Virgin Islands
Eye bolts provide a fixed loop for lifting slings, rigging hardware, or cable anchoring. We manufacture forged lifting eye bolts to DIN 580 / ISO 3266 alongside lighter-duty welded eye bolts, in steel and stainless steel. Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in U.S. Virgin Islands with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
U.S. Virgin Islands at a glance
- Region
- North America
- Population
- 87,146
- Local currency
- United States dollar (USD)
- Languages
- English
- Time zone
- America/St Thomas (UTC-04:00), 9 h 30 min behind India
- Indicative sea transit from India
- about 28–40 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
The single biggest distinction buyers need to get right on eye bolts is whether the application is actually a lifting application or just a tie-down point — the two look nearly identical but are engineered completely differently. A forged DIN 580 lifting eye bolt is designed and tested for straight-line vertical lift with a published working load limit; a lighter welded eye bolt sold as general hardware carries no such rating and should never be used to lift anything.
About Eye Bolts
Forged and welded eye bolts to DIN 580 and ISO 3266 for lifting, rigging, and cable-anchoring applications — manufactured and exported in steel and stainless steel.
View full product details →Shipping & Trade Notes for U.S. Virgin Islands
- • Fasteners are typically classified under HS Chapter 73 for import into U.S. Virgin Islands — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) holds approximately 250,000-400,000 pieces of eye bolts in common sizes (M10-M12). Exact quantity depends on size and type and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where U.S. Virgin Islands Buyers Use Eye Bolts
Machinery lifting points
Forged DIN 580 eye bolts rated for vertical lifting during installation, maintenance, or relocation of equipment.
Cable and canopy anchoring
General-purpose (non-lifting) eye bolts anchoring guy-wires, tensioned cables, or canopy structures.
Marine deck fittings
Stainless eye bolts for rigging and tie-down points on boats and marine structures.
Common Mistakes Buyers Make
Using a non-rated eye bolt for lifting
General hardware-store eye bolts are not proof-load tested and should never substitute for a certified DIN 580 lifting eye bolt.
Lifting at an angle without derating
Angled lifts significantly reduce the safe working load of a straight-pattern eye bolt — a shoulder pattern is needed for angled lifts.
Under-tightening a shoulder eye bolt
Shoulder-pattern eye bolts need the shoulder seated flush against the mounting surface to achieve their rated capacity — a loose eye bolt is a weak eye bolt.
Key Terms
- Working load limit (WLL)
- The maximum load a lifting eye bolt is rated to carry under specified conditions, always well below its actual breaking strength for a safety margin.
- Shoulder pattern eye bolt
- An eye bolt with a shoulder under the eye, designed to maintain more of its rated capacity under angled loading.
- Swivel eye bolt
- An eye bolt with a rotating eye that maintains alignment with the load direction as it shifts during a lift.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to U.S. Virgin Islands
Request a Eye Bolts quote for U.S. Virgin Islands
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.