Europe · en-no
Turnbuckles & Threaded Inserts Manufacturer, Wholesaler, Supplier & Exporter to Norway
Turnbuckles (rigging screws) tension cables and rods in structural, marine, and rigging applications, while threaded inserts add a durable metal thread into softer materials. We manufacture and export both to DIN and buyer-specific standards. Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Norway with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
Norway at a glance
- Region
- Europe
- Population
- 5.6 million
- Local currency
- Norwegian krone (NOK)
- Languages
- Norwegian
- Time zone
- Europe/Oslo (UTC+02:00), 3 h 30 min behind India
- Indicative sea transit from India
- about 18–32 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
A turnbuckle's entire function is mechanical advantage over tension: turning the center barrel draws two oppositely-threaded end fittings together, tightening whatever cable or rod is attached at each end. Getting the two ends threaded in opposite directions is what makes this work — which is also why a turnbuckle can't be repaired by threading a standard rod into one side.
About Turnbuckles & Threaded Inserts
Turnbuckles (rigging screws) to DIN 1480 and threaded inserts (helicoil-type and molded) — manufactured and exported in steel and stainless steel.
View full product details →Shipping & Trade Notes for Norway
- • Fasteners are typically classified under HS Chapter 73 for import into Norway — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) holds approximately 130,000-200,000 pieces of turnbuckles in common sizes (M8-M10). Exact quantity depends on size and end-fitting type and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Norway Buyers Use Turnbuckles & Threaded Inserts
Structural cable bracing
Tensioning diagonal bracing cables in structural and tensile fabric systems.
Fence and gate line tensioning
Adjusting tension in wire fencing runs.
Marine and rigging applications
Stainless steel turnbuckles tensioning standing rigging and deck fittings.
Common Mistakes Buyers Make
Choosing hook ends for a load-reversal application
Hooks can open or slip under reversed or side loading — eye or jaw ends hold more securely in rigging applications.
Exceeding the rated working load
Turnbuckles are rated well below their breaking strength for a safety margin — treat the working load limit as the real ceiling, not the breaking strength.
Skipping the locking mechanism after adjustment
Without a locking nut, pin, or wire, vibration can slowly unwind a tensioned turnbuckle back to loose.
Key Terms
- Jaw end fitting
- A forked, pinned end fitting offering a more secure connection than a hook under load reversal.
- Take-up length
- The total adjustment range a turnbuckle provides as the barrel is turned end to end.
- Right-hand / left-hand thread
- The opposite-direction threads at each end of a turnbuckle that let barrel rotation draw both ends inward simultaneously.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to Norway
Request a Turnbuckles & Threaded Inserts quote for Norway
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.