Africa · en-mg
Nylon Insert Lock Nuts Manufacturer, Wholesaler, Supplier & Exporter to Madagascar
Nylon insert lock nuts resist loosening under vibration by gripping the bolt thread with a nylon collar. We manufacture and export these to DIN 985 / ISO 10511, along with all-metal prevailing-torque lock nuts for high-temperature applications. Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Madagascar with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
Madagascar at a glance
- Region
- Africa
- Population
- 32 million
- Local currency
- ariary (MGA)
- Languages
- Malagasy, French
- Time zone
- Indian/Antananarivo (UTC+03:00), 2 h 30 min behind India
- Indicative sea transit from India
- about 12–35 days depending on coast
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
Nylon insert lock nuts work by interference, not friction — the bolt thread has to physically deform the nylon collar as it passes through, which is exactly why a nylon lock nut should never be reused after removal. Once the nylon has taken the shape of the thread, it no longer grips a fresh bolt with the same prevailing torque, even though the nut looks completely undamaged.
About Nylon Insert Lock Nuts
Nylon insert lock nuts (Nylock) and all-metal prevailing-torque lock nuts to DIN 985 and ISO 10511 — manufactured and exported for vibration-resistant fastening.
View full product details →Shipping & Trade Notes for Madagascar
- • Fasteners are typically classified under HS Chapter 73 for import into Madagascar — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) holds approximately 1-1.4 million pieces of nylon insert lock nuts in common sizes (M10-M12). Exact quantity depends on size and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Madagascar Buyers Use Nylon Insert Lock Nuts
Vibrating machinery and motors
Motor mounts, pump housings, and conveyor frames where standard nuts back off over time.
Automotive and suspension fastening
Chassis and suspension joints subject to constant road vibration.
Outdoor structural mounting
Solar racking and signage exposed to wind-induced vibration over years of service.
Common Mistakes Buyers Make
Reusing a nylon lock nut after removal
The nylon insert deforms permanently to the first bolt's thread and loses locking torque on reinstallation.
Specifying nylon insert nuts near heat sources
Nylon softens well below the temperature many metal components tolerate — use an all-metal lock nut instead.
Assuming any 'lock nut' is vibration-tested
Prevailing-torque performance varies significantly by design — confirm the nut meets DIN 985 / ISO 10511 rather than assuming generic 'lock nut' branding is sufficient.
Key Terms
- Prevailing torque
- The resistance a lock nut applies to rotation even before it contacts the clamped surface, which is what resists vibration-induced loosening.
- Nylon insert (Nylock)
- A nylon collar molded into the top of the nut that deforms around the bolt thread to create prevailing torque.
- All-metal lock nut
- A lock nut that achieves prevailing torque through a deformed metal thread section rather than a nylon insert, suited to high-temperature applications.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to Madagascar
Request a Nylon Insert Lock Nuts quote for Madagascar
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.