East Asia · en-kp
Anchor Bolts Manufacturer, Wholesaler, Supplier & Exporter to North Korea
Anchor bolts embed into concrete foundations to hold structural steel columns, machine bases, and equipment skids in place. We manufacture L-type, J-type, and headed anchor bolts to ASTM F1554 and IS 5624 in custom lengths and grades. Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in North Korea with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
North Korea at a glance
- Region
- East Asia
- Population
- 26 million
- Local currency
- North Korean won (KPW)
- Languages
- North Korean standard language, Korean
- Time zone
- Asia/Pyongyang (UTC+09:00), 3 h 30 min ahead of India
- Indicative sea transit from India
- about 15–25 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
Anchor bolts are cast into concrete before it cures, which means there's no second chance to fix a placement error the way there is with a post-installed anchor — the embedment depth, projection length, and bolt pattern all need to be correct on the structural drawing before the pour, not adjusted afterward. This is why anchor bolt orders are almost always tied to an approved structural drawing rather than a generic catalog size.
About Anchor Bolts
Foundation anchor bolts — L-type, J-type, and headed anchor bolts — to ASTM F1554 and IS 5624, manufactured and exported for structural steel and heavy machinery foundations.
View full product details →Shipping & Trade Notes for North Korea
- • Fasteners are typically classified under HS Chapter 73 for import into North Korea — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) holds approximately 30,000-60,000 pieces of anchor bolts in common sizes (M12-M16), fewer for longer, larger-diameter foundation bolts. Exact quantity depends on size and length and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where North Korea Buyers Use Anchor Bolts
Column base plates
Anchoring structural steel columns to concrete foundations in industrial sheds and multi-story frames.
Machinery foundation bolting
Securing compressors, generators, and pumps to concrete plinths against vibration and dynamic load.
Tower and mounting-frame foundations
Wind, solar, and transmission tower base connections requiring long embedment lengths.
Common Mistakes Buyers Make
Ordering standard catalog lengths for a custom foundation
Embedment depth and projection are project-specific — a generic length often doesn't match the actual slab or footing thickness.
Skipping galvanizing on embedded bolts
Even embedded in concrete, exposed threads and the projecting section need corrosion protection matched to the environment.
Confusing L-bolts and J-bolts
The two look similar but have different pull-out behavior — always confirm which one the structural drawing actually calls for.
Key Terms
- Embedment depth
- How far the anchor bolt extends into the concrete — a critical structural value, not a supplier's default.
- Projection length
- How far the bolt protrudes above the concrete surface, sized to clear the base plate, washers, and nut with adequate thread engagement.
- Headed anchor bolt
- An anchor bolt with a forged or welded head (instead of a bend) for more predictable, testable pull-out resistance.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to North Korea
Request a Anchor Bolts quote for North Korea
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.