North America · en-ca
Stainless Steel Fasteners Manufacturer, Wholesaler, Supplier & Exporter to Canada
Stainless steel fasteners resist corrosion in marine, food-processing, chemical, and outdoor architectural applications where carbon steel would rust or contaminate. We manufacture and export the full fastener range — bolts, nuts, screws, washers, and rivets — in grades 304 and 316. Canadian construction, energy, and machinery buyers source fasteners from overseas manufacturers to secure both metric and imperial hardware at competitive landed cost. We ship into the Port of Vancouver for western Canada and the Port of Montreal for eastern distribution.
Canada at a glance
- Region
- North America
- Population
- 37 million
- Local currency
- Canadian dollar (CAD)
- Languages
- English, French
- Time zone
- America/Toronto (UTC-04:00), 9 h 30 min behind India
- Import taxes & duties
- GST/HST on imports, plus customs duty
- Indicative sea transit from India
- about 28–40 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
The 304 vs. 316 decision comes down almost entirely to one alloying element: molybdenum, added in 316, which dramatically improves resistance to chloride-induced pitting and crevice corrosion. In practice this means 304 performs perfectly well in most indoor and general outdoor settings, while 316 earns its higher price specifically in marine, coastal, and chemical-exposure environments where chlorides are present.
About Stainless Steel Fasteners
Stainless steel 304 and 316 fasteners — bolts, nuts, screws, washers, and rivets — manufactured and exported for corrosive, marine, food-grade, and outdoor applications.
View full product details →Shipping & Trade Notes for Canada
- • Both metric and imperial fastener standards are used in Canada — confirm which your project or catalog requires before ordering.
- • Cold-climate outdoor structures often specify hot-dip galvanized or stainless steel fasteners for corrosion resistance.
- • We provide full export documentation (commercial invoice, packing list, certificate of origin) for Canadian customs clearance.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) holds approximately 500,000-800,000 pieces of stainless fasteners in common sizes (M10-M12) — stainless steel's density is close to carbon steel, so counts are similar. Exact quantity depends on the specific product and size and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Canada Buyers Use Stainless Steel Fasteners
Marine and coastal structures
Grade 316 fasteners resisting chloride exposure from saltwater and sea spray.
Food and beverage processing equipment
Corrosion-resistant, easy-to-clean fasteners meeting hygienic equipment design expectations.
Architectural and facade fastening
Visible exterior fasteners where both appearance and corrosion resistance matter.
Common Mistakes Buyers Make
Specifying 304 for coastal or marine use
304 lacks the molybdenum that gives 316 its chloride resistance — coastal exposure calls for 316 specifically.
Assembling stainless fasteners dry
Stainless-on-stainless threads are prone to galling (seizing) without lubrication, especially on fine threads.
Assuming non-magnetic means genuine stainless grade
Cold-worked stainless fasteners can show slight magnetism even when genuinely 304 or 316 — a magnet test isn't a reliable grade verification method.
Key Terms
- Galling
- A cold-welding/seizing failure that can occur between stainless steel threads during installation, especially without lubrication.
- Passivation
- A chemical treatment that removes free iron from a stainless fastener's surface, strengthening its natural protective oxide layer.
- A2 / A4 designation
- The ISO property class system for stainless fasteners — A2 corresponds to 304-type stainless, A4 to 316-type.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to Canada
Request a Stainless Steel Fasteners quote for Canada
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.
Stainless Steel Fasteners in Major Canada Cities
Stainless Steel Fasteners availability across Canada's major industrial and port hub cities, each with local shipping and delivery detail.