Europe · en-rs
Brass Fasteners Manufacturer, Wholesaler, Supplier & Exporter to Serbia
Brass fasteners combine corrosion resistance, electrical conductivity, and a non-sparking property that makes them the standard choice for electrical fittings, plumbing, and decorative hardware. We manufacture and export brass bolts, nuts, screws, and inserts. Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Serbia with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
Serbia at a glance
- Region
- Europe
- Population
- 6.6 million
- Local currency
- Serbian dinar (RSD)
- Languages
- Serbian
- Time zone
- Europe/Belgrade (UTC+02:00), 3 h 30 min behind India
- Indicative sea transit from India
- about 18–32 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
Brass earns its place in electrical and plumbing hardware from a combination of properties no single alternative matches as well: good electrical conductivity, natural corrosion resistance in wet environments, and — critically for certain industrial settings — a non-sparking property when struck, which is why brass fasteners show up in hazardous or flammable-atmosphere fittings where a steel fastener would be a genuine ignition risk.
About Brass Fasteners
Brass bolts, nuts, screws, and inserts manufactured and exported for electrical, plumbing, and decorative hardware applications requiring non-sparking, corrosion-resistant fasteners.
View full product details →Shipping & Trade Notes for Serbia
- • Fasteners are typically classified under HS Chapter 73 for import into Serbia — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) typically holds 3-5 million pieces of small brass fasteners in common sizes — brass is denser than steel, which reduces piece count per container slightly for the same volume. Exact quantity depends on size and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Serbia Buyers Use Brass Fasteners
Electrical terminals and cable glands
Brass's conductivity and corrosion resistance suit terminal screws and cable entry fittings.
Plumbing and sanitary fittings
Corrosion resistance in consistently wet environments.
Decorative furniture and architectural hardware
Natural brass or plated finishes for visible hardware applications.
Common Mistakes Buyers Make
Using brass fasteners for structural load
Free-cutting brass trades strength for machinability — it's not a substitute for steel in load-bearing applications.
Over-torquing small brass screws
Brass is softer than steel and strips more easily — match torque to the fastener's actual rated strength, not habit from steel hardware.
Ignoring dezincification risk in aggressive water
Some water chemistries can leach zinc from brass over time — a dezincification-resistant (DZR) brass grade is worth specifying for plumbing in aggressive water conditions.
Key Terms
- Free-cutting brass (C36000)
- The most common brass alloy for fastener manufacturing, optimized for machinability over maximum strength.
- Dezincification
- A corrosion process in which zinc leaches out of brass in certain water chemistries, weakening the fastener over time.
- Non-sparking property
- Brass's resistance to producing sparks when struck, relevant to fastener selection in flammable-atmosphere environments.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to Serbia
Request a Brass Fasteners quote for Serbia
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.