Middle East · en-ps
Blind Rivets & Solid Rivets Manufacturer, Wholesaler, Supplier & Exporter to Palestinian Territories
Rivets provide a permanent, vibration-resistant joint without access to the back side of the workpiece. We manufacture and export blind (pop) rivets and solid rivets in aluminum, steel, and stainless steel across standard and structural grades. Global Fasteners Exports supplies wholesalers, distributors, and OEM buyers in Palestinian Territories with industrial fasteners across our full catalog — bolts, nuts, screws, washers, rivets, and structural hardware — manufactured or sourced to the standard your project specifies (DIN, ISO, ASTM, or BIS), with export documentation and container shipping handled end-to-end.
Palestinian Territories at a glance
- Region
- Middle East
- Population
- 5.2 million
- Local currency
- new shekel (ILS)
- Languages
- Arabic
- Time zone
- Asia/Hebron (UTC+03:00), 2 h 30 min behind India
- Indicative sea transit from India
- about 4–12 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
Blind rivets earn their name from solving a specific access problem: they install with tooling from one side only, which is essential wherever the back of the joint is sealed, boxed in, or otherwise unreachable — HVAC ducting and aluminum window frames being two of the most common examples. That one-sided installation is the entire reason to choose a rivet over a bolted connection in the first place.
About Blind Rivets & Solid Rivets
Blind (pop) rivets and solid rivets in aluminum, steel, and stainless steel to DIN 7337 — manufactured and exported for sheet metal and structural assembly.
View full product details →Shipping & Trade Notes for Palestinian Territories
- • Fasteners are typically classified under HS Chapter 73 for import into Palestinian Territories — confirm the exact HS subheading and current duty rate with your customs broker.
- • We supply mill test certificates and export documentation (commercial invoice, packing list, certificate of origin) for customs clearance.
- • Both FCL (full container load) and LCL (less than container load) shipping are available depending on order volume.
Minimum Order — Container Quantity (Approx.)
Blind rivets are very light, so a standard 20ft container (~20 tons) typically holds several million to over ten million pieces in common diameters. Exact quantity depends on size and grip range and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Palestinian Territories Buyers Use Blind Rivets & Solid Rivets
HVAC duct and enclosure assembly
Fast, one-sided fastening where the interior of the duct is inaccessible after assembly.
Aluminum window and door fabrication
Structural framing joints in aluminum fabrication, often using aluminum or stainless rivets to match the frame material.
Automotive body panels
Trim and panel fastening where spot-welding isn't practical.
Common Mistakes Buyers Make
Mismatching rivet and parent metal
Dissimilar metals in a wet environment set up galvanic corrosion that can weaken the joint over time — match materials where possible.
Using standard rivets in a structural application
Standard blind rivets aren't rated for the same shear and tensile loads as structural blind rivets — check the rated grip range and load rating for load-bearing joints.
Ignoring grip range
A rivet installed outside its rated grip range won't form a proper back-side bulb, producing a weak or loose joint.
Key Terms
- Grip range
- The material thickness range a specific rivet length is designed to clamp — critical to installing it correctly.
- Mandrel
- The pin at the center of a blind rivet that's pulled to form the rivet's back-side bulb, then snaps off.
- Structural blind rivet
- A blind rivet engineered for higher shear and tensile strength than standard rivets, used in load-bearing sheet metal joints.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to Palestinian Territories
Request a Blind Rivets & Solid Rivets quote for Palestinian Territories
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.