Philippines · en-ph
Hex Bolts Manufacturer, Wholesaler, Supplier & Exporter to Manila
Hex bolts are the most widely specified fastener in construction, machinery, and structural assembly. We manufacture and source hex bolts to DIN, ISO, and ASTM dimensional standards across a full range of materials and grades, and ship them as full container loads (FCL) or palletized LCL shipments to buyers worldwide. Manila's construction sector is served directly via the Port of Manila, the Philippines' principal container gateway.
Manila, Philippines at a glance
- Region
- Southeast Asia
- City population
- 1.9 million
- Local currency
- Philippine peso (PHP)
- Languages
- Filipino, English
- Time zone
- Asia/Manila (UTC+08:00), 2 h 30 min ahead of India
- Import taxes & duties
- Import duty plus VAT
- Indicative sea transit from India
- about 10–22 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
The hex head is popular precisely because it's a compromise that works everywhere: six flats give a wrench or socket enough surface area to apply high torque without rounding off, while the head stays compact enough to fit into most structural and mechanical layouts. That's why hex bolts, more than any other head style, end up specified as the default fastener across construction, machinery, and vehicle assembly.
Manila Shipping Notes
- • The Port of Manila is the Philippines' busiest container port.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) holds approximately 400,000-600,000 pieces of hex bolts in common sizes (M10-M12) — smaller diameters yield more pieces, larger structural sizes far fewer. Exact quantity depends on the specific size and grade ordered and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Manila Buyers Use Hex Bolts
Structural steel connections
Beam-to-column and gusset-plate connections where a specific property class is called out on the fabrication drawing.
Machine base and frame assembly
General-purpose fastening for equipment frames, guards, and access panels.
Flange and bracket mounting
Piping supports and equipment brackets, often paired with matching high-tensile nuts and washers.
Vehicle and trailer chassis
Chassis and suspension mounting points specified to a defined property class for fatigue resistance.
Common Mistakes Buyers Make
Mixing property classes in one joint
Pairing an 8.8 bolt with a 10.9 nut (or vice versa) undermines the joint's rated proof load even though it assembles fine.
Ignoring full vs. partial thread
Substituting a full-thread bolt where a partial-thread bolt was specified changes shear performance in the grip zone.
Assuming DIN and ASTM grades are interchangeable
A DIN 8.8 bolt and an ASTM Grade 5 bolt have similar but not identical strength profiles — don't substitute without checking the actual mechanical property tables.
Skipping the finish spec on outdoor structures
A plain-finish bolt specified for an outdoor structure will corrode well before the structure's design life, even if the strength grade was correct.
Key Terms
- Property class
- A two-part number (e.g. 8.8) stamped on the bolt head: the first number is roughly 1/100th of minimum tensile strength in MPa, the second is the yield-to-tensile ratio.
- Proof load
- The maximum load a bolt can withstand without permanent deformation — the practical basis for a joint's safe working load.
- Grip length
- The combined thickness of the parts being clamped together, used to select the correct bolt length.
- Full thread vs. partial thread
- Full-thread bolts are threaded along their entire shank; partial-thread bolts leave a smooth shank section for better shear performance.
- Torque-tension relationship
- The (imperfect) relationship between the torque applied to tighten a bolt and the actual clamping force achieved — affected by friction, lubrication, and finish.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Packaging & Export Labeling
Export packing is chosen to survive ocean freight and container loading without corrosion or damage: corrosion-protected paper or oil coating where needed, then cartons, drums, or bulk bags, palletized or crated for the container. We can match specific labeling, barcoding, or carton-marking requirements for OEM and repeat buyers.
Frequently Asked Questions
Related Products
Looking for other products in Manila? Browse the full catalog or view the Philippines market overview.
Request a Hex Bolts quote for Manila
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.