Middle East · en-om
Threaded Rods & Studs Manufacturer, Wholesaler, Supplier & Exporter to Oman
Threaded rods and double-end studs are used wherever a through-fastening or flange-bolting solution needs a custom length. We manufacture and export fully threaded rods and studs to DIN 975/976 and ASTM A193 in a wide range of grades. Oman's port and industrial-zone development at Sohar and Salalah supports growing demand for structural and foundation fasteners. We ship container loads directly into both ports.
Oman at a glance
- Region
- Middle East
- Population
- 4.8 million
- Local currency
- Omani rial (OMR)
- Languages
- Arabic
- Time zone
- Asia/Muscat (UTC+04:00), 1 h 30 min behind India
- Import taxes & duties
- VAT plus GCC customs duty
- Indicative sea transit from India
- about 4–12 days
Population, capital, currency, and languages from Wikidata (checked 2026-09-23); time zones from the IANA tz database. Duty and tax rates change and transit depends on carrier, routing, and port congestion, so figures marked indicative are confirmed against your product and destination port when we quote. Your customs broker should verify final landed cost.
A threaded rod is essentially raw material for a custom-length fastening solution, which is exactly its appeal and its risk: because it can be cut to any length, buyers sometimes under-specify the grade, assuming 'threaded rod' is a commodity item interchangeable across applications. An ASTM A193 B7 stud bolt cut from certified bar stock for a pressure-boundary flange joint is a fundamentally different product from hardware-store threaded rod, even when both present the same thread pitch.
About Threaded Rods & Studs
Fully threaded rods and double-end studs to DIN 975, DIN 976, and ASTM A193 in steel, stainless steel, and alloy steel — manufactured and exported worldwide.
View full product details →Shipping & Trade Notes for Oman
- • Sohar and Salalah both serve as regional transshipment hubs, useful for buyers distributing further across East Africa and South Asia.
Minimum Order — Container Quantity (Approx.)
A standard 20ft container (~20 tons) holds approximately 180,000-250,000 pieces of 1-metre threaded rod in common sizes (M10-M12) — fewer for longer lengths or larger diameters. Exact quantity depends on length and grade and is confirmed at quote time.
You don't need a full container to order. Hurain Engitech & Trade — the group Global Fasteners Exports operates under — regularly ships smaller, partial-container (LCL) orders of just a few pallets or boxes for buyers who don't yet need FCL volume, consolidated with other cargo to keep freight cost reasonable.
Where Oman Buyers Use Threaded Rods & Studs
Flange bolting in pressure systems
ASTM A193 stud bolts matched to ASME flange classes, supplied with nuts and washers as a complete set.
Suspended ductwork and cable trays
Threaded rod hung from structural steel to support ceiling-mounted services.
Post-installed concrete anchoring
Threaded rod combined with chemical anchor systems for retrofit fastening into existing concrete.
Common Mistakes Buyers Make
Treating all threaded rod as interchangeable
Grade matters as much as thread size — a pressure-boundary application needs certified bar stock, not generic hardware-grade rod.
Cutting rod to length without addressing the cut end
An uncoated cut end on galvanized or plated rod becomes a corrosion starting point unless treated or protected.
Confusing continuous-thread rod with double-end studs
They serve different design intents — continuous thread suits variable grip lengths, double-end studs suit a fixed, engineered bolting pattern.
Key Terms
- Stud bolt
- A threaded rod (continuous or double-end) used specifically in flange or pressure-vessel bolting, typically supplied with matching nuts and washers.
- ASTM A193
- The US standard covering alloy steel bolting materials for high-temperature or high-pressure service, including grade B7.
- Double-end stud
- A rod threaded only at both ends with a smooth center section, used where the load-bearing thread must sit at defined positions.
How Ordering Works
- 1
Send your requirement
Product, grade/standard, quantity, and your preferred Incoterm (FOB/CIF/CFR).
- 2
Receive a quote
We confirm price, lead time, and MOQ based on ready stock or manufacturing time.
- 3
Sample & confirm (optional)
For new buyers, we can arrange samples before the full order is confirmed.
- 4
Production, QC & shipping
Manufacturing or sourcing, batch inspection, export documentation, and container loading.
HS Code & Customs Classification
Most fasteners fall under HS Chapter 73 (articles of iron or steel) or Chapter 74/76 for brass and aluminum items — the exact 8-10 digit subheading depends on the specific product and material. We include the HS code on the commercial invoice; confirm the applicable import duty with your customs broker, since rates vary by country and trade agreement.
Frequently Asked Questions
Other Products We Export to Oman
Request a Threaded Rods & Studs quote for Oman
Send your quantities, grade, standard, and preferred Incoterm (FOB/CIF/CFR) for a fast quote.
Threaded Rods & Studs in Major Oman Cities
Threaded Rods & Studs availability across Oman's major industrial and port hub cities, each with local shipping and delivery detail.